FREE SHIPPING on orders over $300 and $9.99 on all others.  Now serving AL, FL, GA, KY, LA, MS, NC, NJ, NY, SC, TN & TX!

Roof Mate™ Top Coat 1 Gal. White Acrylic Reflective Elastomeric Roof Coating (15-Year Limited Warranty)

Rating:
80% of 100
$36.09
In stock
SKU
890325920
GAF Roof Mate™ Top Coat is a top-of-the-line premium elastomeric acrylic coatings. It is a highly reflective, breathable membrane that allows moisture from the substrate or interior to escape while providing protection from exterior weather conditions. When combined with Roof Mate™ Base Coat, it forms a waterproof elastomeric, monolithic membrane, that helps provide protection against normal weathering, aging, and ultraviolet exposure. It is also effective in sealing and encapsulating galvanized metal roofs, helping to prevent residual zinc run-off.

Why United Coatings™ Roof Mate™ Top Coat?

United Coatings™ Roof Mate™ Top Coat is a water-based, acrylic elastomeric top coat that is part of the Roof Mate™ Coating System. Roof Mate™ Top Coat is designed to be applied over Roof Mate™ Base Coat.

Roof Mate™ Top Coat forms a waterproof elastomeric seal, uniformly covering the substrate to form a monolithic coating that helps provide protection from normal weathering, aging, and ultraviolet exposure

Benefits

  • Up to a 15-year ltd. warranty (Specific warranty terms depend upon coverage rates; see product label or documentation for warranty & coverage rates)
  • Creates a highly reflective, breathable membrane that allows moisture from the substrate or interior to escape while also providing protection from exterior weather conditions
  • Use on BUR, SBS, APP, metal, structural concrete, and previously coated acrylic roofs
  • ASTM D6083 water-based acrylic top coat
  • CRRC Rated, FM Approved, UL Classified, Miami-Dade County Product Control approved, and ENERGY STAR® certified (White only; U.S. only)
  • Can be applied by roller, brush, or airless sprayer
Specifications (All Dimensions are Nominal)
Solids by Weight 66% (±2) [ASTM D1644]
Solids by Volume 53% (±2) [ASTM D2697]
Tensile Strength 284 psi (±20) (1.95 MPa) @ 75°F (24°C) [ASTM D2370]
Elongation 258% (±30) @ 75°F (24°C) [ASTM D2370]
Hardness 55-65 Shore A [ASTM D2240]
Permeance 5.7 U.S. perms [ASTM D1653]
Temperature Limits for Service Conditions 30°F to 180°F (-35°C to 82°C)
Colors Evergreen, Gray, Light Gray, Light Tan, Patina Green, Slate Blue, Tan, Teal Green, Terra Cotta, White
VOC <50 g/L
High Temperature Stability No age hardening up to 250°F (121°C)
Resistance to Wind Driven Rain 0.3% moisture result [Federal Specification TTC-555B]
Application Temperature (Air, Surface) Air: 50°F (10°C) and rising; Surface: 50°F – 110°F (10°C – 43°C)
Drying Time (70°F, 50% RH) 3hrs @ 70°F (21°C), 50% R.H.
Weight/Gallon 11.8 lb. (±0.2) (1.41 kg/l) [ASTM D1475]
Thermal Emittance Initial: 0.92; 3 yr: 0.90
Solids by Weight: 66% (±2) [ASTM D1644]
Solids by Volume: 53% (±2) [ASTM D2697]
Tensile Strength: 284 psi (±20) (1.95 MPa) @ 75°F (24°C) [ASTM D2370]
Elongation: 258% (±30) @ 75°F (24°C) [ASTM D2370]
Hardness: 55-65 Shore A [ASTM D2240]
Permeance: 5.7 U.S. perms [ASTM D1653]
Temperature Limits for Service Conditions: 30°F to 180°F (-35°C to 82°C)
Colors: Evergreen, Gray, Light Gray, Light Tan, Patina Green, Slate Blue, Tan, Teal Green, Terra Cotta, White
VOC: <50 g/L
High Temperature Stability: No age hardening up to 250°F (121°C)
Resistance to Wind Driven Rain: 0.3% moisture result [Federal Specification TTC-555B]
Application Temperature (Air, Surface): Air: 50°F (10°C) and rising; Surface: 50°F – 110°F (10°C – 43°C)
Drying Time (70°F, 50% RH): 3hrs @ 70°F (21°C), 50% R.H.
Weight/Gallon: 11.8 lb. (±0.2) (1.41 kg/l) [ASTM D1475]
Thermal Emittance: Initial: 0.92; 3 yr: 0.90
Codes
FBC State of Florida approved
FM FM approved
Miami-Dade County Miami-Dade County Product Control approved
FBC: State of Florida approved
FM: FM approved
Miami-Dade County: Miami-Dade County Product Control approved
Testing Methods & Applicable Standards
ASTM D6083 Meets or exceeds minimum requirements
ASTM D6083: Meets or exceeds minimum requirements
Energy Rating
CRRC CRRC rated
ENERGY STAR® Certified (U.S. only) Yes
USGBC LEED Gold Contributes
Title 24 (California Energy Commission) Yes
CRRC: CRRC rated
ENERGY STAR® Certified (U.S. only): Yes
USGBC LEED Gold: Contributes
Title 24 (California Energy Commission): Yes
Shipping and Packaging
Pail 5-gallon (18.9 liter)
Bucket 1-gallon (3.8 liter)
Drum 55-gallon (208 liter)
Shelf Life 18 months 50°F – 90°F (10°C – 32°C)
Pail: 5-gallon (18.9 liter)
Bucket: 1-gallon (3.8 liter)
Drum: 55-gallon (208 liter)
Shelf Life: 18 months 50°F – 90°F (10°C – 32°C)

Brochures

Codes

Data Sheets

Details (By Roof Area)

Safety Data Sheets (SDS)

Specifications

Technical Bulletins

Technical Information

Warranty - Guarantee

  • How to Install TPO/PVC Coatings | GAF Roof Mate
    Prep, seal & coat a single-ply roof needing repair or restoration with the Roof Mate Coating System. Learn more at: https://www.gaf.com/en-us/roofing-products/commercial-roofing-products/roof-coating-systems
  • How To Preserve and Restore Your Roof | GAF Roof Mate
    Prep, seal & coat a roof needing repair or restoration with the Roof Mate Coating System. Learn more at: https://www.gaf.com/en-us/roofing-products/commercial-roofing-products/roof-coating-systems
  • How To Apply Asphalt Coatings | GAF Roof Mate
    Prep, seal & coat a roof needing repair or restoration with the Roof Mate Coating System. Learn more about Roof Coatings at: https://www.gaf.com/en-us/roofing-products/commercial-roofing-products/roof-coating-systems
  • How to Install the GAF Roof Mate Coatings System | GAF Roofing
    Roof coatings are a great way to extend the life of your low-slope or flat roof. They protect the roof from wind, rain and sun that can cause a roof to dry out and crack and can provide energy savings by lowering the temperature of the roof. Before you coat the roof, replace any wet insulation and address any ponding water areas. Once the roof is sound, you are ready for the Roof Mate System. The Roof Mate System includes all the components needed to restore the roof. The system includes Roof Mate Base Coat, Top Coat, Butter Grade Flashing, Fabric and Seam Tape. The Roof Mate Coating System can be used directly on most metal, asphaltic, and single ply roofs. Learn more about Roof Coatings at: https://www.gaf.com/en-us/roofing-products/commercial-roofing-products/roof-coating-systems
  • How To Pick the Right Roof Coatings for You and Your Business | GAF Roof Coatings (Roof Mate)
    Find out why GAF's line of roof coatings are the right choice for you. Learn more about GAF Roof Coatings at https://www.gaf.com/en-us/roofing-products/commercial-roofing-products/roof-coating-systems
  • GAF Roof Coatings Product Selection Overview | GAF
    An overview of GAF Roof Coating Products. Learn more at: https://www.gaf.com/en-us/roofing-products/commercial-roofing-products/roof-coating-systems
  • Low Door Sill Flashing | TPO Commercial Roofing | GAF Drawing 342
    An installation overview showing a Low Door Sill detail. This is for EverGuard TPO/PVC Single-Ply Roofing Systems. Learn more about TPO Roofing: https://www.gaf.com/en-us/roofing-products/commercial-roofing-products/tpo-roofing-systems The GAF Drawing series provides basic instructions on how to GAF roofing products are assembled. This video detail applies to all Systems.
  • Flush Door Sill Flashing | TPO Commercial Roofing | GAF Drawing 343
    An installation overview showing a Flush Door Sill Flashing detail. This is for EverGuard TPO/PVC Single-Ply Roofing Systems. Learn more about TPO Roofing: https://www.gaf.com/en-us/roofing-products/commercial-roofing-products/tpo-roofing-systems The GAF Drawing series provides basic instructions on how to GAF roofing products are assembled. This video detail applies to all Systems.
  • Window Sill Flashing | TPO Commercial Roofing | GAF Drawing 345
    An installation overview showing a Window Sill Flashing detail. This is for EverGuard TPO/PVC Single-Ply Roofing Systems. Learn more about TPO Roofing: https://www.gaf.com/en-us/roofing-products/commercial-roofing-products/tpo-roofing-systems The GAF Drawing series provides basic instructions on how to GAF roofing products are assembled. This video detail applies to all Systems.
  • Raised Door Sill Flashing | TPO Commercial Roofing | GAF Drawing 341
    An installation overview showing a Raised Door Sill Flashing detail. This is for EverGuard TPO/PVC Single-Ply Roofing Systems. Learn more about TPO Roofing: https://www.gaf.com/en-us/roofing-products/commercial-roofing-products/tpo-roofing-systems The GAF Drawing series provides basic instructions on how to GAF roofing products are assembled. This video detail applies to all Systems.
  • GAF Roofing | A Guide to a Proper Adhesion Test
    We are GAF. (https://www.gaf.com) More homes and businesses in the U.S. are protected by a GAF roof than by any other product. We are the leading roofing manufacturer in North America, with plants strategically located across the U.S. For over a century, we have manufactured and sold a wide variety of high-performing residential and commercial roofing products including Timberline, North America's best-selling roof shingle. People trust GAF to protect what matters most in their daily lives.
Write Your Own Review
You're reviewing:Roof Mate™ Top Coat 1 Gal. White Acrylic Reflective Elastomeric Roof Coating (15-Year Limited Warranty)
Your Rating